FTLX8571D3BCL FINISAR 10G多模0.3km光模块
FTLX8571D3BCL
Form Factor: SFP+
FTLX8571D3BCL 10Gb/s SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
key Features:
- Hot-pluggable SFP+ footprint
- Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support)
- Power dissipation < 1W
- RoHS compliant
- Single 3.3V power supply
- Maximum link length of 400m on OM4 MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC connector
- Built-in digital diagnostic functions
- Commercial temperature range: -5°C to 70°C
Applications:
- 10GBASE-SR/SW 10G Ethernet
- 1200-Mx-SN-I 10G Fibre Channel
Specifications:
| FTLX8571D3BCL | |
|---|---|
| Distance | 400 m |
| Data Rate (max) | 10.5 Gb/s |
| Protocol | 10x Fibre Channel Compliant 10 Gigabit Ethernet Compliant Wireless CPRI Compliant |
| Low End Case Temperature (°C) | -5 |
| High End Case Temperature (°C) | 70 |
| Diagnostics | Digital |
| Transmitter | VCSEL |
| Receiver | PIN |
| Voltage Supply | 3.3 |
| Connector | LC |
| Wavelength | 850nm Band |
Datasheet and Documents:
FTLX8571D3BCL , 10Gb/s 850nm Multimode Datacom SFP+ Transceiver
