市场主流交换机常见光模块非认证告警信息
主机厂商为限制第三方模块在其设备上使用，通常会对接入光模块进行检测，包括但不限于读取光模块制造商名称、型号、序列号、自定义部分数据（加密信息有明文的或动态的）等信息，判断是否为原厂或经过认证的兼容模块；对于非原厂或检测不通过的模块，不同的厂商有不同的处理策略，比如不支持使用、告警或禁用部分功能。
摩泰实验室列举了部分有自定义兼容要求的主流交换机品牌，给大家展示一下其对第三方模块的处理措施。
表1 主流品牌交换机常见非认证告警
|
主机品牌 |
不兼容表现/设备处理措施 |
模块非认证告警信息 |
|
华三/H3C |
1、模块接入接口，控制台弹出非认证告警信息； |
/*** H3C S6850-56HF ,Version 7.1.070, Release 6710P03 ***/ %Jan 1 01:09:02:487 2015 H3C OPTMOD/4/PHONY_MODULE: Twenty-FiveGigE1/0/11: A non-H3C transceiver is detected. Please confirm the label of the transceiver. If there is an H3C logo, it is suspected to be a counterfeit H3C transceiver. This transceiver is NOT sold by H3C. H3C therefore shall NOT guarantee the normal function of the device or assume the maintenance responsibility thereof! |
|
华为/HUAWEI |
1、模块接入接口，控制台弹出非认证告警信息； 2、识别信息中会有非华为认证模块告警； |
/*** HUAWEI CE6860-48S8CQ-EI ,Version 8.150 (V200R002C50SPC800) ***/
<HUAWEI>dis int 25GE1/0/7 tran
25GE1/0/7 transceiver information:
-------------------------------------------------------------------
Common information:
Transceiver Type :10GBASE_LR
Connector Type :LC
Wavelength (nm) :1310
Transfer Distance (m) :20000(9um/125um SMF)
Digital Diagnostic Monitoring :YES
Vendor Name :OEM
Vendor Part Number :SFP-10G-LR-20KM
Ordering Name :
-------------------------------------------------------------------
Manufacture information:
Manu. Serial Number :M5123456
Manufacturing Date :2024-12-01
Vendor Name :OEM
-------------------------------------------------------------------
Alarm information:
Non-Huawei-Ethernet-Switch-Certified Transceiver
-------------------------------------------------------------------
<HUAWEI>
#29/active/hwOpticalUnAuthorized/Critical/occurredTime:2023-05-11 10:01:59/-/-/alarmID:0x08132154/CID=0x80fc0101:The optical module was not certified by Huawei Ethernet Switch.(EntPhysicalIndex=16850184, EntPhysicalName=25GE1/0/7, EntityTrapFaultID=145920, Reason=It has been observed that a transceiver has been installed that is not certified by Huawei Ethernet Switch. Huawei cannot ensure that it is completely adaptive and will not cause any adverse effects.If it is continued to be used, Huawei is not obligated to provide support to remedy defects or faults arising out of or resulting from installing and using of the non-certified transceiver.)
|
|
思科/CISCO |
1、模块接入接口，控制台弹出模块不受支持告警信息； 2、接口被强制关闭； |
/*** CISCO C9300-24T-E, Version 17.09.05 ***/ *Nov 3 03:55:01.231: %PM-4-ERR_DISABLE: gbic-invalid error detected on Twe1/1/1, putting Twe1/1/1 in err-disable state *Nov 3 03:55:31.229: %PM-4-ERR_RECOVER: Attempting to recover from gbic-invalid err-disable state on Twe1/1/1 *Nov 3 03:55:31.230: %PLATFORM_PM-6-MODULE_ERRDISABLE: The inserted SFP module with interface name Twe1/1/1 is not supported |
|
极进网络/EXTREME |
1、模块识别类型，用"!"符号表示不支持； |
/*** EXTREME X690, Version 22.4.1.4 ***/
* X690-48x-2q-4c.7 # show int confport 5 conf no
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
5 VR-Default E A ON 1000 1000 FULL FULL NONE !SF+_SR
================================================================================
> indicates Port Display Name truncated past 8 characters
Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback
Port State: D-Disabled, E-Enabled, L-License Disabled
Media: !-Unsupported, $-Unlicensed
Media Red: * - use "show port info detail" for redundant media type
Flow Cntrl: Shows link partner's abilities. NONE if Auto Neg is OFF
|
|
瞻博/JUNIPER |
1、模块接入接口，控制台弹出模块不受支持告警信息； |
/*** JUNIPER QFX5200-48Y-AFO, Version 20.2R2-S3.5 flex ***/ Jan 1 15:23:40 QFX5200 fpc0 sfp-0/0/46(46), SFP 1: not Juniper supported SFP root@QFX5200> show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis xxxxxxxxxx QFX5200-48Y Pseudo CB 0 Routing Engine 0 BUILTIN BUILTIN RE-QFX5200-48Y FPC 0 REV 03 650-084587 xxxxxxxxxx QFX5200-48Y CPU BUILTIN BUILTIN FPC CPU PIC 0 BUILTIN BUILTIN 48x25G-6x100G Xcvr 46 NON-JNPR M4123452 SFP+-10G-SR ---(more)--- |
|
戴尔/DELL |
1、模块接入接口，控制台弹出非认证告警信息； |
/*** DELL S5224F-ON, Version 10.4.3E ***/
<165>1 2023-10-07T20:48:12.138162+00:00 OS10 dn_eqm 1894 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %EQM_MEDIA_PRESENT: Media inserted . Media SFP+ 10GBASE-SR in slot:1 port:1 serial number:M4123456 is not qualified and is disabled
<165>1 2023-10-07T20:48:12.429841+00:00 OS10 dn_ifm 971 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_UP: Interface operational state is up :ethernet1/1/1:1
OS10# show inventory media
--------------------------------------------------------------------------------------------------------------
System Inventory Media
--------------------------------------------------------------------------------------------------------------
Node/Slot/Port Form-Factor Media Serial-Number Qualified
--------------------------------------------------------------------------------------------------------------
1/1/1 SFP+ SFP+ 10GBASE-SR M4123456 false
1/1/2 Not Present
--more--OS10#
|
|
博科/BROCADE |
1、模块接入接口，控制台弹出非认证告警信息； 2、识别信息中会有非BROCADE认证模块告警，且不支持读取DOM； |
/*** BROCADE SLX9140, Version 17s.1.00a ***/ 2000/01/01-00:50:54, [NSM-1042], 139020, DCE, WARNING, SLX, Unqualified SFP transceiver for interface Ethernet 0/15 is detected. 2000/01/01-00:50:54, [NSM-1001], 139021, DCE, INFO, SLX, Interface Ethernet 0/15 is online. SLX# show interface status | include up Eth 0/15 connected (up) Access 10G 10G-SFP-LR SLX# show media Interface Ethernet 0/15 Optic is not Brocade qualified for current protocol, optical monitoring is not supported Transceiver 0000000000000020 Identifier 3 SFP Name lw Vendor Name OEM Vendor OUI ff:ff:ff Vendor PN SFP-10G-LR-20KM Vendor Rev B4 |
|
诺基亚/NOKIA |
1、模块接入接口，控制台弹出不支持类型； |
/*** NOKIA 7250 IXR, Version 23.10.R1 ***/ 132 2008/01/01 01:06:36.567 UTC MINOR: PORT #2033 Base Port 1/1/c33 "SFF unsupported type" A:NS2203C6306# show port 1/1/c33 optical =============================================================================== Optical Interface : 1/1/c33 =============================================================================== Transceiver Data Transceiver Status : unsupported Transceiver Type : QSFP28 DCO : Disabled OLS : Disabled Model Number : none TX Laser Wavelength: 1310 nm Diag Capable : yes Number of Lanes : 4 Connector Code : LC Vendor OUI : 00:00:00 Manufacture date : 2024/11/12 Media : Ethernet Serial Number : SFSA2514 Part Number : QSFP28-100G-LR4 Optical Compliance : 100GBASE-LR4 Link Length support: 10km for SMF |
|
ARISTA |
1、模块接入接口，控制台弹出非认证告警信息； |
/*** ARISTA 7160-48YC6-F, Version 4.26.2F ***/ Oct 9 06:12:32 localhost XcvrAgent: %TRANSCEIVER-3-DISABLED: The transceiver for interface Ethernet1 has been disabled because it is not qualified. (manufacturer OEM model SFP-10G-SR serial number M4123456) localhost#show int status Port Name Status Vlan Duplex Speed Type Flags Encapsulation Et1 errdisabled 2 full 10G 10GBASE-LR --More-- |
|
ARUBA |
1、识别为不支持光模块； |
/*** ARUBA 2930F-8SR-PoEP-4SFPP, Version:WC.16.02.0000x ***/
Aruba-2930F-8SR-PoEP-4SFPP# show int tran
Transceiver Technical Information:
Product Serial Part
Port Type Number Number Number
------- ----------- ------------ ------------------ ----------
1 ?? ?? unsupported
The following transceivers have extra information:
Port # Message
-------- -------------------------------------
Port 1 Unsupported Transceiver. (SelfTest Err#0e8000)
Check: www.hp.com/rnd/device_help/2_inform for more info.
|
转载自摩泰，点击查看原文
创建时间：2025-07-15 12:37
넶浏览量：0
